Digital Wave Corporation | Acoustic Emission Publications

Acoustic Emission Publications

Send us an email to obtain a copy of any publication listed below. You can also read more about modal acoustic emission here.

Carpenter, S.H. and M.R. Gorman. "A waveform investigation of the acoustic emission generated during the deformation and cracking of 7075 aluminum". Progress in Acoustic Emission 7, Japanese Society for NDI (1994): 105-111.

Cawthorne, M. and S. Ziola. "Modal acoustic emission monitoring of helicopter rotor system dynamic". Review of Progress in Quantitative Nondestructive Evaluation 16A (1996): 413-419.

Gentry, J.D. "In situ measurement of laminated composite stiffness". Structural Health Monitoring Ed. F. Chang. Lancaster, PA and Basel, Switzerland: Technomic Publishing (1997): 615-623.

Gorman, M.R. "Plate wave acoustic emission". Journal of the Acoustical Society of America 90 (1) (Jul. 1991): 358-364.

Gorman, M.R. "Acoustic emission for the 1990s". Proceedings of the IEEE 1991 Ultrasonic Symposium 2 (1991): 1039-1046.

Gorman, M.R. "New technology for wave based acoustic emission and acousto-ultrasonics". Wave Propagation and Emerging Technologies AMD 188, American Society of Medical Engineers (1994): 47-59.

Gorman, MR. "Modal AE: A new understanding of acoustic emission". Journal of Acoustic Emission 14 (3) (1997): S102.

Gorman, M.R. "Some connections between AE testing of large structures and small samples". Nondestructive Testing and Evaluation 14 (1998): 89-104.

Gorman, M.R. and S.M. Ziola. "Plate waves produced by transverse matrix cracking". Ultrasonics 29 (1991): 245-251.

Gorman, M.R. and W.H. Prosser. "AE source orientation by plate wave analysis". Journal of Acoustic Emission 9 (4) (1990): 283-288.

Gorman, M.R. and W.H. Prosser. "Application of normal mode expansion to acoustic emission waves in finite plates". Journal of Applied Mechanics 63 (Jun. 1996): 555-557.

Huang, W., S.M. Ziola, J.F. Dorighi, and M.R. Gorman. "Stiffness measurement and defect detection in laminated composites by dry-coupled plate waves". SPIE Proceedings 3399 (Mar. 1998): 66-76.

Lacjak, P.R. "Modal acoustic emission".

Martin, C.A., C.B. van Way, A.J. Lockyer, J.N. Kudva, and S. Ziola. "Acoustic emission testing on an F/A-18 E/F titanium bulkhead". SPIE Proceedings 2444 (1995): 204-211.

May, S., I. Searle, S. Ziola, and M. Phelps. "F-16 structural crack monitoring by means of broadband acoustic emission".

Morscher, G.N. "Modal acoustic emission and damage accumulation in a woven SiC fiber reinforced SiC matrix composite". Published as "Modal acoustic emission of damage accumulation in a woven SiC/SiC composite". Composites Science and Technology 59 (Apr. 1999): 687-697.

Prosser, W.H. and M.R. Gorman. "Plate mode velocities in graphite/epoxy plates". Journal of the Acoustical Society of America 96 (2) (Aug. 1994): 902-907.

Prosser, W.H., J. Dorighi, and M.R. Gorman. "Extensional and flexural waves in a thin-walled graphite/epoxy tube". Journal of Composite Materials 26 (14) (1992): 2016-2027.

Prosser, W.H., K.E. Jackson, S. Kellas, B.T. Smith, J. McKeon, and A. Friedman. "Advanced waveform-based acoustic emission detection of matrix cracking in composites". Materials Evaluation 53 (9) (Sept. 1995): 1052-1058.

Schafer, M.E., R. Ross, B. Brashaw, and R. Adams. "Ultrasonic inspection and analysis techniques in green and dried lumber".

Searle, I., S. Ziola, and P. Rutherford. "Crack detection in lap-joints using acoustic emission". SPIE Proceedings 2444 (1995): 212-223.

Searle, I., S. Ziola, and B. Seidel. "Crack detection on a full scale aircraft fatigue test". SPIE Proceedings (1997). San Diego, CA.

Ziola, S.M. and M.R. Gorman. "Source location in thin plates using cross-correlation". Journal of the Acoustical Society of America 90 (5) (Nov. 1991): 2551-2556.

Ziola, S. and I. Searle. "Automated source identification using modal acoustic emission". Review of Progress in Quantitative Nondestructive Evaluation 16 (1997): 413-419.